Scholl Australia | Footcare, Orthotics & Advice

Health for Feet

Express Pedi How To Guide

Start by cleaning your feet, washing and thoroughly drying them before you begin. Then, pick your required intensity roller head and insert it into the device – extra coarse roller head for particularly thick and stubborn hard skin, regular coarse roller head for excess hard skin on the foot and soft touch roller head for a perfect, soft finish.

To get started make sure you have already inserted the four AA batteries and switch your Express Pedi on. This should start the roller spinning and with an integrated safety stop, it’s safe and gentle. Now you can allow the roller to move slowly over the areas of dry skin that you want to remove from your feet. Try not to push down too hard against the skin, although there is a built in safety mechanism that stops the roller from spinning if you accidentally do. Try not to hold it in the same place for longer than 3-4 seconds.

When you have treated all the hard skin areas, and your feet are starting to feel smoother, switch off your Express Pedi and rinse your feet to remove any excess dry skin.

Whenever you find more time during the week, or when your feet require a top up – we recommend using a Velvet Smooth Essential Moisture Cream. The cream soaks in seconds, it’s not greasy and it’s ideal for a daily application in the morning.

To clean your Express Pedi, make sure it is first turned off and then push the button on the side to remove the roller head and rinse the roller head under the tap, this can be rinsed under a tap. To clean the rest of the device, wipe it over with a moist cloth and when both are clean and dry, you can reassemble them.

Store your Express Pedi away somewhere safe with its protective cover on, ready to be used again next time!